We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Home > Modem Pool Selection Guide: Ports & Modules

Modem Pool Selection Guide: Ports & Modules

Modem Pool Selection Guide: Ports & Modules

Modem Pool Selection Guide: Ports & Modules

The YX SMS modem pool runs 8, 16, 32 or 64 SIM cards at once from a single USB connection to a Windows, Linux or Android machine, with EC25, EC200A or EC20 modules chosen at order time. This guide compares every build option in one place — port count, radio module, power adapter and price tier — so you can land on the right configuration before you buy. Buyers searching for a 4g lte modem usually need the 4G builds described below, while the older gsm modem label describes the same SIM-slot hardware under its legacy name. Confirm the port count first, then the module for your region.

8 / 16 / 32 / 64SIM slots per chassis, picked at checkout
EC25 · EC200A · EC20Selectable built-in 4G modules
USB + COM portNo local network required to send SMS
YX 4G LTE 8/16/32/64 ports SMS Modem Pool Bulk Send SMS IMEI Change AT Command

Four Devices, One Confusing Name

Almost every support question on this hardware starts with the wrong category. Split them apart first, and the remaining decisions are only port count, module and plug.

Multi-port SMS chassis, single-SIM sticks and voice gateways all get sold under the same loose vocabulary. The four descriptions below cover what this site's range actually contains, so you can tell which one your project needs before you look at a single specification.

64-port bulk SMS modem chassis with front-panel SIM slots
A multi-port chassis: each slot carries its own module and its own power switch.

Modem pool

A chassis holding 8, 16, 32 or 64 SIM slots, each slot with its own 4G module and its own power switch. It links to a PC over USB and sends SMS through a COM port.

Typical buyer: SMS aggregators and enterprise messaging teams sending at volume.

GSM modem

The legacy name for SIM-slot SMS hardware. It is applied loosely to both 2G and 4G units, so treat it as a category rather than a specification.

Typical buyer: procurement staff searching by the older term who still need to confirm the network generation.

GOIP / SIP gateway

A SIM-to-VoIP bridge built for call traffic rather than text, with SIP channels as the primary output.

Typical buyer: voice-termination operators who measure success in concurrent calls, not messages.

USB dongle

A single-SIM modem in stick form, built on EC25 or EC200A modules, supporting SMS text sending and high-speed internet access.

Typical buyer: field engineers and developers who need one SIM online for testing or a laptop connection.

Full Specification: YX 4G LTE SMS Modem Pool

Everything the product page confirms about the 8/16/32/64-port pool, in one place.

4G LTE router SMS modem with 64 ports and included software
One USB connection to the host computer carries all ports on the chassis.
ProductYX 4G LTE 8/16/32/64 ports SMS Modem Pool Bulk Send SMS IMEI Change AT Command
Port options8 ports · 16 ports · 32 ports · 64 ports (SIM slots, selected before purchase)
Built-in 4G moduleEC25 / EC200A / EC20 — module is optional and selected at order time
Simultaneous capacityUp to 8, 16, 32 or 64 SIM cards sending and receiving SMS at the same time
Host connectionUSB interface to the computer; SMS is sent and received over the COM port
Network requirementNo network connection is required to run the SMS software
Included softwareSMS Caster (SMS software) included
Command supportIMEI change, USSD and AT command
Port controlIndividual power switch on each port
Operating systemsWindows, Linux or Android
Power adapterEU · CN/AU · CN · US · UK (selected at order time)
Price tier1 Unit Price, or 2+ Units Price (minimum quantity 2 under that tier)
SKUNo SKU value is displayed on the product page

Frequency-band values are not published on the product page. Confirm the bands your carrier uses before ordering.

Module and Region Compatibility

The module determines where the modem pool will work. It is the single choice most likely to cause an exchange, so make it before you check out.

Global

EC25

Listed as region-specific global coverage. Confirm the exact bands with your carrier for the country of deployment.

Excludes US / CA / JP

EC200A

Regional models exclude the United States, Canada and Japan. Suited to supported European and Asian markets.

IN · RUS · EU · Asia

EC20

Supports India, Russia and parts of Europe and Asia — a useful middle option for those markets.

Power Adapter Region

Adapter option Choose it when
EUYour rack or office uses European two-pin sockets.
CN/AUYou deploy in China or Australia on the combined plug type.
CNYou deploy in mainland China on the standard local socket.
USYou deploy in North America on the two-blade plug.
UKYou deploy in the United Kingdom or Ireland on the three-pin plug.

The adapter is a separate selection from the module. Both are chosen on the same product page before you add the item to your cart.

Bulk send SMS modem pool with changeable AT command module
Module, port count and adapter are all confirmed at order time.

Port-Count and Throughput Planner

Port count is the one specification you cannot change after delivery. The table below turns the stated per-port rate into a capacity picture for each build.

Build Concurrent SIM slots Stated per-port rate Continuous 24-hour ceiling Best fit
8 ports8~3,600 SMS/hour~691,200 SMSPilots and small, targeted campaigns
16 ports16~3,600 SMS/hour~1,382,400 SMSGrowing teams moving off single-SIM devices
32 ports32~3,600 SMS/hour~2,764,800 SMSEstablished senders with steady daily traffic
64 ports64~3,600 SMS/hour~5,529,600 SMSMaximum density from one USB connection and one chassis

The approximately 3,600 SMS per port per hour figure is the rate stated for this modem pool. The 24-hour ceilings are simple arithmetic on continuous full-load operation and are not a guarantee of delivered traffic — carrier filtering, message length, SIM plans and software settings all reduce real output. Size your build by peak concurrent SIM requirement, not by the ceiling.

YX modem pool chassis showing individual port power switches
Each port has its own power switch, so one SIM can be cycled without stopping the others.

Capability and Control Checklist

What the pool can do once it is on your bench, and what each capability means for day-to-day operations.

IMEI changeSupported on the pool as a listed feature.
USSD commandsSend USSD requests through the ports for the operator services that require them.
AT command controlScript and control the device at a low level with standard AT commands.
SMS Caster softwareIncluded with the pool, so there is no separate software purchase to budget for.
Per-port power switchRestart a single port without powering down the chassis or interrupting the other SIMs.
USB and COM portOne USB connection to the PC; SMS traffic runs over the COM port.
No local network neededThe product page states no network connection is required to send and receive SMS through the COM port.
Windows, Linux, AndroidDeploy on whichever of the three operating systems your team already maintains.

Bulk Orders and Build Options

Deployments rarely stop at one chassis. If you are rolling out several sites, ordering mixed port counts, or need a specific module and plug combination confirmed before purchase, talk to the team before you check out — it is cheaper than an exchange.

2+ Units PriceA separate price tier applies from two units; no shipment below two units under that tier.
Module is optionalEC25, EC200A or EC20 is fixed at order time, not after delivery.
Flash sale on the page¥392.00 reduced to ¥384.16, with ¥6.80 saved per ¥680.00 spent.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

What Does a 4G LTE SMS Modem Pool Do for Bulk Messaging?

A 4G LTE SMS modem pool is a multi-port hardware cluster that gives one host control over many SIM-based SMS channels.

Read article

What LTE Bands Do 4G SMS Modems Need in Your Country

LTE band matching for a 4G SMS modem pool starts with your destination country, carrier, and SIM card details, not a universal band list.

Read article

Setting Up an 8-Port SMS Modem Pool on Windows and Linux

Setting up an 8-port SMS modem pool on Windows or Linux starts with host port recognition, SIM channel mapping, and a clean AT response before any SMS software connects. The hardware supports both…

Read article

Frequently Asked Questions

what is the difference between a 4g lte modem pool and a gsm modem?

a modem pool is a multi-port chassis — 8, 16, 32 or 64 sim slots — with a 4g module in each port, controlled from a pc over usb. “gsm modem” is the older, looser term for the same kind of sim-slot sms hardware; it does not tell you the network generation. always confirm the module and network generation before ordering.

which port count should i order — 8, 16, 32 or 64?

match the port count to your peak concurrent sim requirement. eight ports suits pilots and small campaigns, 16 and 32 suit growing senders, and 64 ports gives the highest density from a single usb connection and a single chassis.

which 4g module do i need for my country?

ec25 is listed as region-specific global coverage. ec200a regional models exclude the united states, canada and japan. ec20 supports india, russia and parts of europe and asia. the product page does not publish frequency-band values, so confirm the bands your carrier uses before ordering.

does the modem pool need an internet connection to work?

no. the modem pool connects to a computer over usb and sends and receives sms through the com port. the included sms caster software runs on windows, linux or android.

what software is included with the modem pool?

sms caster is included with the modem pool, so there is no separate software purchase. it works alongside imei change, ussd and at command support on the same device.

can i change imei and send at commands?

yes. imei change, ussd and at command control are all listed features of the pool. each port also has its own power switch, so a single port can be restarted without taking the chassis offline.